DISPLAY: This menu permits specific elements of the GUI to be disabled.
Selections are – SHUTTER, LENS DATA, EVF MENU, STATUS and GREY SCALE
Shutter: When checked, displays frame rate and sensor status on GUI upper edge. Also allows
the user to choose if camera shutter value is reported in Degrees or 1/Seconds format.
Note: Shutter values are always input in 1/seconds format, irrespective of this choice.
Lens Data: When checked displays focus / zoom / iris data on GUI mid-upper edge. Also al-
lows the user to choose if Distance is reported in Feet or Meters.
EVF Menu: When checked displays EVF menus data on left edge of camera GUI
Status: When checked, displays media, exposure and audio status on GUI lower edge.
Grey Scale: When checked, displays an 11 step grey scale on GUI right edge.
Note: Disabling a GUI element disables it on all monitor outputs, and disabling the EVF
Menu display also disables the EVF menu controls.
MAINTENANCE
This sub-menu defines how the cooling fan behaves, and enables software updates.
Fan Sub Menu: specifies how the cooling fan operates.
The camera's fan speed can be changed depending on the ambient air temperature and re-
cording application. The default setting is AUTO
Auto: This setting combines VARIABLE speed fan operation while not recording, with SILENT
mode when in record. This mode is recommended for extended duration dialog recordings.
To Next Page
Loading...
Need help?
General
