Redarc BMS1230S2-NA User Manual

6
1 INTRODUCTION
1.4 Specifications
Electrical Specifications
Inputs
AC Input
Input Voltage Range (nominal) 220-240VAC 50Hz
Power Rating 560W
Efficiency 80% - 90%
Connection IEC Mains Plug
DC Input
Input Voltage Range 9 - 32V
Turn ON/OFF Threshold 12V (24V) 13.2V/12.7V (26.4V/25.4V)
Power Rating 520W
Efficiency 94%
Connection Phoenix 1967498 Connector
Solar Input
Input Voltage Range 9 - 32V
Turn ON (Open Circuit Voltage) 17.5V
Power Rating 520W
Efficiency 93%
Connection Phoenix 1967498 Connector
Output
Total Battery Capacity 40 - 800Ah
Output Battery Volts (Nominal) 12V
Output Battery Volts (Minimum) 4V
Output Current (Nominal) 0-32A
Maximum Current on Load Disconnect Wire 1A
Memory Save on Battery Disconnect Yes
Output Protection
Short Circuit Protection Yes
Surge Protection Yes
Reverse Polarity Protection Yes
Overload Protection Yes
Max Volts @ Battery Terminals (25°C Nominal) Storage Mode Touring Mode Float
Gel Setting 14.4V 14.4V 13.5V
AGM Setting 14.4V 14.4V 13.5V
Calcium Setting 16.0V 15.2V 13.5V
Standard Lead Acid Setting 15.5V 14.8V 13.5V
Lithium Setting 14.5V 14.5V 13.6V
Thermal Specifications
Operating Temperature -40°C - 80°C
SLA, AGM, or Calcium Charging Temperature -25°C - 60°C (when Vop >10.5V)
SLA, AGM, Gel, Calcium or LiFePO
4
Charging Temperature 0°C - 60°C
Over Temperature Shutdown Yes
Temperature Compensation
Standard Lead Acid, AGM, Gel or Calcium Battery +30mV / °C < 25°C < -30mV / °C
Lithium Setting 40°C < 0.5%/°C < 60°C
Over Temperature Shutdown Yes
Compliance
CE 2009/19/EC, 2009/104/EC
Safety IEC60335
Environmental RoHS Compliant
General Specifications
Main Unit Dimensions 445x185x79mm
Remote Dimensions 186x74x29mm
Kit Weight 5.5kg
Warranty 2 years

Redarc BMS1230S2-NA Specifications

General

Brand	Redarc
Model	BMS1230S2-NA
Category	Control Systems
Language	English