Need help?Do you have a question about the Redarc BMS1230S3-NA and is the answer not in the manual?
General| Brand | Redarc |
|---|---|
| Model | BMS1230S3-NA |
| Category | Automobile Battery Charger |
| Language | English |
General safety instructions for installation, operation, and maintenance.
Risks associated with lead-acid batteries and necessary precautions.
Safety measures for operating the battery charger.
Compliance statement regarding FCC rules for digital devices.
Highlights the Manager30's capabilities and advantages.
Describes the Manager30's purpose for recreational automotive applications.
Details the function and customization options of the Remote Monitor.
Lists the components included in the Manager30 kit.
Provides detailed electrical, thermal, and general specifications.
Explains the 3-stage Touring Mode charging profile.
Details the 8-stage Storage Mode charging profile.
Guides on setting the maximum charge current for the battery.
Explains the priority order for charging sources.
Diagram showing how the Manager30 connects to system components.
General guidance on mounting the main unit, remote monitor, and sensor.
Specific instructions for mounting the Manager30 main unit.
Instructions for recess and wall mounting the Remote Monitor unit.
Steps for safely detaching the Remote Monitor unit.
Guidance on secure mounting of the Battery Sensor.
Importance of correct cable and fuse sizing for safety and performance.
Recommended cable sizes for input connections.
Recommended cable sizes for output connections.
General warnings and cautions for wiring the unit.
How to wire and activate the Load Disconnect feature.
How to wire and activate the Ignition Trigger feature.
Detailed steps for connecting the Battery Sensor.
Overview of required connections for the Main Unit.
Illustrates a typical wiring setup for the Manager30 system.
Guidance on selecting and wiring batteries for the system.
Explains the Manager30's solar charging capabilities and setup.
Introduction to the Remote Monitor's functions and controls.
Explanation of the Remote Monitor's LCD display elements and navigation.
Step-by-step guide for the initial setup process (Language, Battery, Date/Time).
Overview of the User Menu screens and data logging.
Details on Input, Output, and Charging Status screens.
Allows switching between Touring and Storage modes.
How to access and modify Battery Setup and Remote Settings.
Guides on selecting battery type and capacity.
Configuration options for the Remote Display and its operation.
Overview of advanced operational settings for the Manager30 unit.
Configuration of the maximum charging current for the battery.
Setting up alarms for low battery State of Charge or voltage.
Configuration of the Load Disconnect feature based on SoC or voltage.
Options for triggering the DC input based on ignition or voltage.
Details on Ignition, Auto, and voltage lock settings for DC input.
Access to diagnostic tools and factory reset options.
How the unit displays warning and fault notifications.
Explains fault messages and 'Clear' vs. 'Ignore' options.
General approach to diagnosing and resolving faults.
Lists specific fault messages, their causes, and recommended actions.
Lists specific warning messages, their causes, and recommended actions.
Lists common operational issues and their solutions.
Table of default settings programmed into the unit.
Common questions and answers regarding operation and troubleshooting.
A template for drilling mounting holes for the Remote Monitor.
Blank page designated for user notes.
Details of the product warranty terms and conditions for North America.
To Next Page
