Need help?Do you have a question about the Redarc DPS1225 and is the answer not in the manual?
General| Output Voltage | 12VDC |
|---|---|
| Output Current | 25A |
| Maximum Power | 300W |
| Power Output | 300W |
| Standby Current Draw | Less than 10mA |
| Operating Temperature | -20°C to +60°C |
| Protection Features | Over Temperature Protection |
Highlights crucial warnings, including the prohibition of using the unit to charge batteries, and general safety cautions for operation.
Details the front panel LEDs, explaining their states for voltage level and output status indication.
Explains how ambient temperature and heat-sinking affect output power, and the role of voltage regulation.
Lists LED flashing sequences to identify specific faults with the unit, installation, or input supply.
Details connecting RED (input), BLUE (ignition), and ORANGE (voltage select) wires for basic setup and configuration.
Explains connecting BROWN (output), BLACK (ground), and GREEN (LED) wires, including specific earth isolation needs.
Provides guidelines on appropriate cable sizing and secure wiring connection methods for optimal safety and reliability.
Details the procedure for connecting multiple DPS units in parallel to increase output current capacity safely.
Provides a flowchart and step-by-step guidance for diagnosing and resolving common operational issues with the unit.
Details the limited warranty terms and provides contact information for customer support across different geographical regions.
To Next Page