25
16.3 OPTIONS, WINDROW KIT.
An optional windrow kit can be purchased, see fig. 14. The kit has the following part-
number: 211.731.010. A detailed guide on how to assemble the kit can be found in the part
pages of this manual.
MOUNTING INSTRUCTIONS (see fig. 14)
1. Mount the lifting eye nuts (1) instead of the nut that holds the clamp. Check part pages to see
a detailed picture.
2. Mount the bushes (2) by using the long bolts to the rear roller support.
The bushes can be left on the machine, even when not having the kit attached to the Verti-
Drain.
3. Mount the strips (4) on the bushes and secure the bushes with R-clip (5)
Fig. 14
To Next Page
Loading...
