Maintenance
Introduction
WARNING: Before you do any
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.
X = The instructions are given in this operator's
manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Maintenance Daily maintenance Do mainte-
nance at a
minimum of 1
time each
year
Maintenance interval in hours
Before After 50 250 500
Do a check of the parking
brake.
X X X X X
Do a check of the level of
the engine oil.
O
Do a check of the hydraulic
oil level.
X
Do a check of the safety
system.
X
Make sure that there are no
fuel or oil leaks from the
product.
*
Make sure that there are no
damage on the product.
* * * *
Make sure that there are no
loose parts.
X
Do a check for damages on
the cutting deck.
X
Do a check of the cutting
deck for adjustment.
X X
Do a check of the tire pres-
sures.
X X X X
Do a check of the battery
connections.
X X X X
Do a check of the throttle
cable and choke cable.
O
Do a check of the caster
wheels (each 200 hours).
X X
Do a check of the clearance
of the engine valve.
1
* *
1
Must be done by approved service agent.
16 1997 - 003 - 07.12.2022
To Next Page
Loading...
