RedMax GZ3500T - Technical Data; Accessories

4. Do a complete servicing of the product.
Technical data
Technical data
RedMax GZ3500T
Engine
Cylinder displacement, cu.in/cm
3
2.15/35.2
Idle speed, rpm 2900
Power, kW/hp @ rpm 1.5/2.0 @ 10 000
Ignition system
1
Spark plug NGK CMR6H
Electrode gap, mm/in 0.65/0.026
Fuel and lubrication system
Fuel tank capacity, US Pint/cm
3
0.53/250
Oil tank capacity, US Pint/cm
3
0.36/170
Type of oil pump Adjustable
Weight
Weight, lb/kg 7.5/3.4
Saw chain/guide bar
Type of drive sprocket/number of teeth Spur/6
Saw chain speed at 133% of maximum engine power
speed, ft/s / m/s.
83.0/25.3
Accessories
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw model RedMax GZ3500T meet the safety
requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
995 - 003 - 30.01.2019 29