Why Redring Plumbing Product water doesn't flow when pressing button B?
If water does not flow when button “B” is pressed on your Redring Plumbing Product, check the circuit through the solenoid coil. If it's defective, replace it. Also, check the circuits through the microswitches and the shutdown PCB, replacing them if defective. Ensure that the power supply is reaching the shower.
General| Energy Efficiency Class | A |
|---|---|
| Water Connection | 15mm |
| Approvals | BEAB, CE |
| Installation | Professional installation recommended |
| Features | Over temperature protection |
Adjusting temperature when water is too cold using knob C.
Adjusting temperature when water is too hot using knob C or power setting.
Explains how seasonal temperature variations affect shower performance.
Explains how water pressure fluctuations impact shower temperature.
Checklist for qualified service personnel to diagnose issues.
Instructions for mounting the shower unit and riser rail to the wall.
Details warranty terms, conditions, and exclusions for the product.
Lists conditions and situations not covered by the product guarantee.
Provides helpful notes and tips for optimal shower operation and stabilization.
To Next Page
