EasyManua.ls Logo

Redring MS6 User Manual

Redring MS6
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HIGH
LOW
HIGH
LOW
WARRANTY AND CONTACT DETAILS
Terms and Conditions for UK only (outside UK contact your local distributor)
In the unlikely event of a product breakdown during the guarantee period you should contact our
Service and Repair Helpline who will be able to assist with the repair and advise of the best course of
action to be taken.
Please DO NOT remove the product prior to making this call as this may invalidate your guarantee
Service and Repair Tel: 03448793588 or
email: Customer.services@glendimplex.com
We warranty this product for a period of 12 months from the date of purchase.
Within the guarantee period we will resolve, free of charge, any manufacturing defects in the product
resulting from faulty workmanship or material on condition that:
The product has been correctly installed and commissioned in accordance with our instructions and
is being used on the supply circuit or voltage printed on the rating plate.
The product has been used in accordance with these instructions and has not been tampered with
or otherwise subject to misuse, neglect or accident.
The product has not been taken apart, modified or repaired except by a person authorised by us.
Evidence of the date of purchase in the form of an invoice or receipt will be required in order to
qualify under the terms of this guarantee.
For the service work to be undertaken free of charge, the work must only be undertaken by
Glen
Dimplex Limited, or our approved agents.
product ends when the original warranty
period ends.
EXCLUSIONS
This warranty DOES NOT cover damage or defects arising from poor or incorrect installation,
improper use or lack of maintenance, including the build-up of limescale. The unit MUST NOT
be fitted
to any type of thermostatic mixer valve or tap.
The unit MUST NOT be fitted to a bath or kitchen sink other than for hand-washing purposes.
It is the responsibility of the installer to check that the installation parameters meet the requirements of
the products, and any relevant regulations.
If we are called out to a fault, which is subsequently identified as being an installation fault, we will
make a charge, it is important that the routine checks are completed before calling us out, as many
issues can be simply diagnosed and resolved.
A charge will be made where a call under the terms of the warranty has been booked and a failure
was not product related, or an engineer arrives and is not able to gain access.
We make no guarantees as to response time for repairs. We will endeavour to achieve the most
timely response possible but while we indicate an average response time, this should not be taken as
a warranty.
The warranty applies to a repair or replacement (at our discretion) of the product subject to the
conditions above, and DOES NOT cover compensation for the loss of the product or consequential
loss of any kind. This guarantee does not apply to the repair or replacement of pressure relief devices,
isolating switches, electrical cable, fuses and/or circuit breakers.
This warranty does not affect your statutory rights.
A.
B.
C.
D.
E.
F
.
Service under warranty has no effect on the expiry date. The warranty on any exchanged parts or

Other manuals for Redring MS6

Question and Answer IconNeed help?

Do you have a question about the Redring MS6 and is the answer not in the manual?

Redring MS6 Specifications

General IconGeneral
Power Rating3kW
Capacity6 liters
Installation TypeWall Mounted
Voltage230 V
Water Connection1/2" BSP
ApprovalsBEAB

Summary

Important Safety and Support Information

After Sales Service

Provides contact details and services for customer support and technical advice.

Purpose, Specifications & Rules

Technical Specifications

Details nominal volume, voltage, power, pressure, and appliance type.

General Safety Precautions

Earthing and Wiring

Ensures proper electrical connection, earthing, and compliance with regulations.

Appliance Description and Operation

Key Components and Functions

Explains the body, flange, control panel, heating element, and safety features.

Installation Procedure

Mounting and Location

Guides on device placement, wall mounting, and orientation.

Water Connections and Expansion

Piping and Pressure Management

Details dielectric junctions, pipework, pressure relief valve, and expansion.

Periodic Maintenance

Lime Scale and Anode Care

Addresses lime scale buildup and recommends anode inspection/replacement.

Maintenance Procedures

Pressure Relief Valve Installation

Mandates pressure relief valve installation and protection from freezing.

Fault Finding

Troubleshooting Guide

Lists common symptoms, possible causes, and recommended actions for issues.

After Sales Service and Annex Data

EU Regulation Compliance

Provides data on water heater efficiency and energy consumption as per EU regulations.

Warranty Information

Warranty Coverage and Exclusions

Details what the warranty covers, what it excludes, and how to make a claim.

Contact and Support

Provides contact details for Redring customer service and international support.

Related product manuals