REDSAIL TECH CO., LTD
Add: B218/F2, Qilu Software Plaza No.1 Shunhua Road, Jinan Hi-tech Zone, Shandong, China ZIP: 250101
Tel: +86-531-86516855/56/57 Fax: +86-531-86516858
Email: info@cutmate.net
If you use Inkscape, please click on the extension- -CutMate- -Send to cutmate.
2) Connect the Cutting plotter to the computer, install the USB driver, and then click Devices.
3) Double-click to open the COM, the port will be automatically identified after the connection,
please click to select the corresponding port. For Type command, if your cutting plotter is
with English language, please select HPGL, if it is Chinese, please select DMPL, then click
ok and close the dialog box.
To Next Page
Loading...
