Need help?Do you have a question about the Redsail Cutting Plotter and is the answer not in the manual?
Ensure the power supply matches the plotter's 90V-230V requirement.
Avoid touching the plotter's track while running and prevent foreign objects.
Disconnect power when not in use and ensure the plotter shell is grounded.
Detailed identification of the plotter's main parts and their functions.
Instructions for correctly positioning the plotter for stable operation.
Procedure for the first power-up and verifying plotter initialization.
Steps for connecting the plotter to a computer via RS232.
Operating the plotter to receive data from the computer and adjusting settings.
Manual control of the plotter carriage and setting a new origin.
Performing a test cut and resetting the plotter to stop operations.
Instructions for installing and adjusting the blade protrusion for optimal cutting.
Guidance on using ball pens as plotting pens and setting their protrusion.
Steps for lifting the roller and placing media correctly.
Using keys to advance media straightly for accurate cutting.
To Next Page
General
