Redsail Cutting Plotter - Important Notices for Operation; Power Supply Requirements; Safety Precautions During Operation; Electrical Safety and Grounding

Redsail Cutting Plotter User Manual V4.0
Notice
(1) REDSAIL cutting plotter’s power supply is 90V-230V, when your power
supply does not fit the requirement, please add a power holder.
(2) Don't touch the plotter’s track when it is running. If the plotter is damaged or
works wrongly for this reason, we will repair your plotter but not free.
(3) Prevent little goods from drawing into plotter.
(4) Please put down the power wire if you don't use plotter for a long time.
(5) Don't put down any wire when cutting plotter or computer is power on.
(6) Cutting plotter's shell must connect ground with an electronic wire.