!
IEC SOCKET
We wanted D100PRE to be a valid a choice for world travelling professional guitarists.
Main IEC power socket has a special voltage selector, to easily change input voltage,
from 100-120-230 to 240VAC, without opening rack case nor the use of a solder
machine.
While this is an easier procedure than de-soldering and soldering wires, opening
the case, etc, it can still partially dangerous.
We highly recommend the help of a medium flat screwdriver for this operation AND
a proper tech if you’re not 100% sure of what you’re doing.
Procedure is self-explicatory, you just need to remove voltage selection from little
window under IEC power socket, take out voltage selector and put it back in place
on setting (voltage) you desire. It’s done.
To Next Page
Loading...