FUSION COMPUTER INSTRUCTIONS
26
COMPUTER OPERATION
START Button
A
B INCLINE UP/DOWN Buttons
SAFETY KEY
C
D
SPEED UP/DOWN Buttons
STOP/ENTER Button
E
F
Display Window
BUTTON FUNCTIONS
START – Press to start exercise at initial speed 0.5MPH / 0.8KPH.
STOP / ENTER
a. Press to confirm program and preset function values setting mode.
b. Press to run setting procedure before pressing the START KEY.
c. Press to stop exercise during workout time.
SPEED UP
a. Press to increase exercise speed by 0.1MPH/KPH.
b. Hold the button to rapidly increase speed per second and release the button to stop the function.
SPEED DOWN
a. Press to decrease exercise speed by 0.1MPH/KPH.
b. Hold the button to rapidly decrease speed per second and release the button to stop the function.
INCLINE UP / DOWN
a. Press up or down to change incline level.
b. Press to select programs and preset related function value.
SAFETY KEY
The safety key must be inserted into the slot on the console in order to operate the treadmill. Always insert the safety key
and attach the clip to your clothing at your waist before beginning your workout. If you should encounter problems and need
to stop the motor quickly, simply pull on the cord to disengage the safety key from the console. To continue operation first
turn the power switch to off and set the speed controller to stop. Next turn the power switch to on and reinsert the safety key
into the console.
To Next Page
Loading...
Need help?
General
