EasyManua.ls Logo

Reebok One GX50 - User Program Creation; Recovery Test; Important Notes

Reebok One GX50
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONSOLE GUIDE
07.REEBOKFITNESSEQUIPMENT.COM
Recovery
At any time during workout RECOVERY button can be pressed to record recovery level.
Press RECOVERY button.
Place both hands on the pulse sensors.
Computer will count down from 0.60 seconds and display the PULSE as below. DO NOT REMOVE YOUR
HAND FROM THE PULSE SENSORS OR THE READING WILL NOT BE GIVEN.
Recovery Fitness Grades
F1 Excellent
F2 Very Good
F3 Good
F4 Satisfactory
F5 Below Average
F6 Poor
Notes
This computer is powered with a 9V power adaptor.
DO NOT USE ANY OTHER ADAPTOR WITH THE MACHINE.
If the computer is inactive for approximately 4 minutes it will shut down automatically and the resistance motor
will reset. Press any button to turn the computer back on.
If at any time the computer does not function correctly remove the power supply and reconnect it to restart.
After the computer has counted down for 0.60 seconds a RECOVERY level reading will be given.
User Program
User can create own workout profile.
In main menu press UP/DOWN to select USER.
Program profile will be displayed as below.
06
07
Press UP/DOWN to alter resistance level in the first segment of the profile.
Press MODE to move to the next segment.
Continue the above for all columns.
Press START to begin exercise once complete.

Related product manuals