Reebok PURE - Assembly Steps - Part 3; Step 5: Pedal Attachment

05
Step 5:
5- :
the side of the pedal strap with more slots should go on outside of pedal
to allow ease of adjustment at a later date
5-2: Attach the Right Pedal (13) onto the right pedal shaft and tighten
with open end spanner.
The right pedal is marked with R and should be threaded onto the crank (33)
in a CLOCKWISE direction.
5-3: Attach the Left Pedal (12) onto the left pedal shaft and tighten with
open end spanner.
The left pedal is marked with L and should be threaded onto the crank (33)
in a COUNTERCLOCKWISE direction.
1 Slot the Pedal Strap on the pedals as marked L and R for left and Right.