09
OPERATING PROCEDURE
Power on:
1. power adaptor to , the console will power on and
a beep will be heard, LCD will display all segments.
Connect rear of unit
2. Console will show “SELECT USER”, user may press mode to enter into user
selection mode
Use joggle wheel to select U1 to U4 and press MODE for confirmation.
then set user information for SEX, AGE, HEIGHT and WEIGHT.
.
User Joggle wheel to scroll.
3
MODE to enter into selection mode. Turn joggle wheel to select
MANUAL PROGRAM USER PROGRAM H. R. C.and WATT program
.In standby mode, console will display “SELECT WORKOUT”, user may press
, ,
To Next Page
Loading...
