Reebok Pure+ - Assembly Steps

03
Step 1:
Attach Front Stabilizer and Rear Stabilizer to Main frame
fastened with Allen Head Bolts (14) Tighten with Allen Key.
1-1. (2) (3) (1),
ASSEMBLY STEPS
Step 2:
2 : Front Post Cover (11
on Front Post .
2-2: Connect Upper Computer
Wire (15 with Lower Computer
Wire (16 ，
he cables are locked together fully
2-4:Insert Front Post (4 into Main
frame fasten with Allen
Head Bolt and Arc Washers
(19 . Tighten with Allen Key.
2-5: Connect the Upper Computer Wire
(15 with the computer connector
on the back of the Computer (6 .
Install Computer (6 onto Front
Post (4 fasten with Screws (22)
tighten as shown.
-1 Slide )
(4)
)
)
)
(1),
(20)
)
)
)
)
)
Lift it to the position as shown
in the diagram)
A click will be heard
when t .
Place the Front Post Cover
(11) onto Main Frame (1).
(