Reebok S 9.80 Treadmill - Page 10

10
11. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the Latch Knob (54) are in the posi-
tions shown.
Attach the Latch Bracket (14) and the Storage
Latch (53) to the Base (83) with two 3/8" x 2"
Bolts (4) and two 3/8" Nuts (8).
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x 2"
Bolt (4) and a 3/8" Nut (8). Note: It may be nec-
essary to move the Frame back and forth to
align the Storage Latch with the bracket.
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 21).
53
8
8
Large
Barrel
83
14
4
56
11
4
54
10. Attach the console assembly with six 5/16" x 1"
Bolts (7) and four 5/16" Star Washers (10) (only
the left side is shown).
See steps 4 and 6. Tighten the 3/8" x 4 1/2"
B
olts (6).
Console
Assembly
10
7
10
10
7