Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Safety
• Do not operate in an explosive atmosphere
• Do not operate in the presence of ammable gases or fumes
• Keep away from live circuits
• Do not remove the instrument cover; contact REED Instruments
(info@reedinstruments.com) for service or calibration on this or
any other REED product
• This meter is for indoor use, altitude up to 2000m
• This manual should be read and well understood before the
instrument is used
• When measuring in-circuit components, rst de-energize the
circuits before connecting the test leads
• Do not measure a capacitor that is not fully discharged
• When measuring within a circuit, the circuit must be de-energized
before connecting the test leads
• Wipe the instrument clean when used in a dusty environment
• Do not leave the instrument exposed to direct heat for long peri-
ods of time
• Before removing the battery cover, ensure that the instrument is
disconnected from any circuit and is powered OFF
Features
• Measures inductance/capacitance/resistance with secondary
parameters including dissipation factor (D), quality factor (Q),
phase angle (θ), equivalent series/parallel resistance (ESR or Rp)
• Auto ranging operation for AC impedance & DC resistance
measurement
• Dual LCD display
• Auto LCR smart check and measurement
• Series/Parallel modes
• Ls/Lp/Cs/Cp with D/Q/θ/ESR parameters
continued ...
1.888.475.5235info@REED-Direct.com
REED-Direct.com
To Next Page
Loading...
Need help?
General
