Need help?Do you have a question about the REED R8050 and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Measurement Range (dB) | 30 to 130 dB |
| Frequency Range | 31.5 Hz to 8 kHz |
| Accuracy (dB) | ±1.4 dB |
| Resolution (dB) | 0.1 dB |
| Display | LCD |
| Power Supply | 9V Battery |
| Battery Type | 9V |
| Frequency Weighting | A and C |
| Time Weighting | Fast, Slow |
| Microphone | 1/2" Electret Condenser Microphone |
| Battery Life | 30 hours |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -10 to 60°C |
Protective accessory for microphone use in wind.
Details the LCD screen symbols and their functions for measurements.
Instructions for turning the meter on and off.
Instructions for turning the display backlight on and off.
Selects A or C weighting for sound level measurements.
Selects Fast (F) or Slow (S) response for noise measurements.
Selects Low (Lo) or High (Hi) measurement ranges for readings.
Controls maximum level and data hold functions for measurements.
Details the type of microphone used in the sound level meter.
Location and information about the battery compartment.
Step-by-step guide for taking sound level measurements.
Procedure for installing a new battery in the compartment.
When and how to replace the battery when voltage drops.
To Next Page
