Need help?Do you have a question about the REED R6010 and is the answer not in the manual?
General| Brand | REED |
|---|---|
| Model | R6010 |
| Category | Measuring Instruments |
| Language | English |
Calibrate the meter before first use by following specific steps for accurate readings.
Properly position the sensor and press the MEAS button to take readings.
Press MEAS to hold the current measurement; press again to resume normal operation.
Adjust RISK and WET alarm values using SET, UP, and DOWN buttons.
Turn the LCD backlighting on or off using the UP button.
Reference table correlating display values to moisture status for various materials.
Replace batteries when the low battery indicator appears.
Store in a clean, dry place and use biodegradable cleaners.
Details the one-year warranty for defects in material or workmanship.
Contact REED Instruments Customer Service for questions or assistance.
To Next Page
