REED R6010 - Safety Information; Product Features; Technical Specifications

3
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet stated product
specications.
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
Features
• Non-invasivemeasurements,runsensoroversurfacebeingtested
without scratching or penetrating the surface
• Classiesmoisturestatusas:dry,atriskorwet
• Detectsmoisturecontentinvariousbuildingmaterials
• Measurementdepthfrom0.8"(20mm)to1.6"(40mm)
• DataHoldandMin/Maxfunctions
• Useradjustablealarmswithaudibleandvisualindicators
• LargebacklitLCDdisplay
• Lowbatteryindicatorandautoshut-off
Specifications
MeasuringRange: 0to100.0%MoistureContent
DepthDetection: 0.8to1.6"(20to40mm)
Resolution: 0.1%
SensorType: Pinless
Display LCDDisplay
BacklitDisplay: Yes
DataHold: Yes
Min: Yes
continued...
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com