REED R5030 - User Manual

Model
R5030
AC/DC True RMS Clamp
Meter with
Temperature
Instruction
Manual
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
reedinstruments
www
com
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Summary

Safety

Features

Specifications

Electrical Specifications

Instrument Description

Display Description

Operating Instructions

AC;DC Current Measurements

Instructions for measuring AC/DC current using the clamp meter.

AC;DC Voltage Measurements

Steps for performing AC and DC voltage measurements with the meter.

Resistance Measurements

Procedure for measuring electrical resistance using the clamp meter.

Continuity Test

Steps to perform a continuity test to check for electrical pathways.

Diode Test

Guide on how to conduct a diode test and interpret results.

Capacitance Measurements

Instructions for measuring capacitance, including safety precautions.

Frequency;Duty Cycle Measurements

How to measure frequency and duty cycle using the instrument.

Temperature Measurements

Procedure for measuring temperature using the Type-K thermocouple.

Non-Contact AC Voltage Measurements

Steps for detecting AC voltage without direct contact.

Data Hold and Backlight

How to use the data hold and backlight features of the meter.

Battery Replacement

Instructions for safely replacing the meter's batteries.

REED R5030 Specifications

General

Resolution (Lux/fc)	1 Lux/0.1 fc
Display	LCD
Sensor	Silicon photodiode
Sampling Rate	1.5 times/second
Operating Temperature	0 to 40°C
Operating Temperature (°F)	32 to 122 °F
Storage Temperature	-10 to 60 °C
Operating Humidity	0 to 80% RH