REED R5030 - Safety

reedinstruments
www
com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Safety
• Do not exceed the maximum allowable input range of any function
• Do not apply voltage to the meter when resistance function
is selected
• Set the function switch OFF when the meter is not in use
Warning
• Set the function switch to the appropriate position before measuring
• When measuring volts do not switch to current/resistance modes
• When changing ranges using the selector switch always disconnect
the test leads from the circuit under test
• Do not exceed the maximum rated input limits
Caution
• Improper use of this meter can cause damage, shock, injury or death
• Read and understand this user manual before operating the meter
• Always remove the test leads before replacing the battery
• Inspect the condition of the test leads and the meter itself for any
damage before operating
• Repair or replace any damage before use
• Individual protective equipment must be used around voltages above
60V DC, 42.4V peak or 30V AC RMS
• Remove the battery if the meter is to be stored for long periods
• Always discharge capacitors and remove power from the device
under test before performing diode, resistance, or continuity tests
• Voltage checks on electrical outlets can be difcult and misleading
because of the uncertainty of connection to the recessed electrical
contacts
• If the equipment is used in a manner not specied by the manufac-
turer, the protection provided by the equipment may be impaired
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com