EasyManua.ls Logo

REED R5010 - Specifications - Current, Resistance, Capacitance, Frequency; Current, Resistance, Capacitance Specs; Frequency, Duty Cycle, Temp, 4-20 mA Specs

REED R5010
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
reedinstruments
www
com
6
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
AC Current
50 to 1000Hz
400μA 0.1μA
±(1.5% reading + 3 digits)
4000μA 1μA
40mA 0.01mA
400mA 0.1mA
10A 0.01A
(20A: 30 sec max with reduced accuracy)
All AC voltage ranges are specied from 5% of range to
100% of range
NOTE: Accuracy is stated at 65
o
F to 83
o
F (18
o
C to 28
o
C) & less than 75%RH
Function Range Resolution Accuracy
Resistance
400Ω 0.01Ω ±(0.3% reading + 9 digits)
4kΩ 0.0001kΩ
±(0.3% reading + 4 digits)
40kΩ 0.001kΩ
400kΩ 0.01kΩ
4MΩ 0.001MΩ
40MΩ 0.001MΩ ±(2.0% reading + 10 digits)
Capacitance
40nF 0.001nF
±(3.5% reading + 40 digits)
400nF 0.01nF
4μF 0.0001μF
±(3.5% reading + 10 digits)40μF 0.001μF
400μF 0.01μF
4000µF 0.1µF
±(5% reading + 10 digits)
40mF 0.001mF
Frequency
(electronic)
40Hz 0.001Hz
±(0.1% reading + 1 digits)
400Hz 0.01Hz
4kHz 0.0001kHz
40kHz 0.001kHz
400kHz 0.01kHz
4MHz 0.0001MHz
40MHz 0.001MHz
100MHz 0.01MHz Not specied
Sensitivity: 0.8V rms min. @ 20% to 80% duty cycle and
<100kHz; 5Vrms min @ 20% to 80% duty cycle and > 100kHz.
Frequency
(electrical)
40.00-
400Hz
0.01Hz ±(0.5% reading)
Sensitivity: 15Vrms
Duty Cycle
0.1 to
99.90%
0.01% ±(1.2% reading + 2 digits)
Pulse width: 100µs - 100ms, Frequency: 5Hz to 150kHz
Temp (type-K)
-58 to
1832°F
1°F
±(1.0% reading + 4.5°F)
±(1.0% reading + 2.5°C)
(probe accuracy not included)
-50 to
1000°C
1°C
4-20mA%
-25 to
125%
0.01% ±50 digits
0mA=-25%, 4mA=0%, 20mA=100%, 24mA=125%
Note: Accuracy specications consist of two elements:
• (% reading) – This is the accuracy of the measurement circuit
continued ...

Related product manuals