To Next PageTo Next Page
Need help?Do you have a question about the REED R5010 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Max Voltage (AC) | 750V |
| Max Voltage (DC) | 1000V |
| Max Current (AC) | 10A |
| Max Current (DC) | 10A |
| Max Frequency | 10MHz |
| Continuity | Yes |
| Diode Test | Yes |
| Data Hold | Yes |
| Relative Mode | Yes |
| Backlight | Yes |
| Auto Power Off | Yes |
| Safety | CAT III 1000V, CAT IV 600V |
| Temperature Range | -20 to 1000°C |
| Battery | 9V |
| Weight | 380g |
Clarifies hazard symbols like WARNING, CAUTION, and installation categories (I, II, III, IV).
Lists critical warnings regarding voltage/current limits, high voltages, and proper meter usage.
Highlights True RMS, resolution, measurement types, and bundled accessories.
Provides technical specifications for DC and AC voltage measurements.
Lists ranges, resolutions, and accuracies for current, resistance, and capacitance.
Provides specifications for frequency, duty cycle, temperature, and 4-20mA measurements.
Covers AC voltage response, display capabilities, battery, fuses, and environmental limits.
Describes the physical layout of buttons, display, and input jacks.
Details the safety standards and categories the meter complies with.
Clarifies the meaning of various icons, units, and measurement indicators shown on the LCD.
Provides general safety, meter handling, and DC voltage measurement procedures.
Explains how to connect and measure DC voltage with the multimeter.
Explains how to connect and measure AC voltage with the multimeter.
Details procedures for AC voltage, frequency, and duty cycle measurements.
Explains how to connect and measure DC current with the multimeter.
Provides the complete procedure for measuring AC current.
Explains how to safely measure resistance values.
Details procedures for continuity checks and diode testing.
Guides on measuring temperature using a probe and capacitance.
Details how to measure electronic frequency and duty cycle.
Explains how to perform 4-20mA loop current measurements.
Details autoranging, manual ranging, and Max/Min recording modes.
Explains the relative measurement function and activating the display backlight.
Details how to freeze readings (Hold) and capture peak values (Peak Hold).
Describes the low battery indicator and how to manage the auto power off feature.
Provides guidelines for keeping the meter clean and protected.
Instructions for safely installing or replacing the battery.
Instructions for safely replacing the meter's fuses.
