REED R7050 - Instrument Specifications; Measurement Procedures; Apply Reflective Mark; Align Laser Beam

reedinstruments
www
com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Specifications
RPMRange:  2to99,999RPM
CountRange:  1to99,999REV
Resolution:  0.1RPM(2to999.9RPM);
  1RPM(over1000RPM)
Accuracy:  ±(0.05%+1digits)
Display:  5-digitLCD
AutoPower-off:  10seconds
SamplingTime:  0.5sec(over120RPM)
DetectingDistance:  50to500mm
TimeBase:  Quartzcrystal
PowerConsumption:  Approx45mA
PowerSupply:  9Vbatteryorexterior6VDC
OperatingTemperature: 0to50
o
C
Dimensions:  160x58x39mm
Weight:  151g
IncludedAccessories:  (3)8"stripsofreectivetape,battery,
soft carrying case and instruction manual
Measuring Procedures
1.Applyareectivemarktotheobjectbeingmeasured.
2.PresstheMEASbuttonandlineupthelaserbeamtotheapplied
target.Verifythatthemonitorindicatorlightswhenthetargetaligns
with the beam.
Mode
The instrument will default back to the mode you were last working with.
Tochangethemode,presstheMODEbutton.Theinstrumentwillswitch
betweenRPMandREV.
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com