© 2021 | All rights reserved. 7
Assembly.
1. Fix the folding clip firmly in place and
ensure the scooter is on it’s stand.
2. Align the handlebars so that when
the wheel is centred and straight, the
handlebars are straight.
3. Insert the screws into the holes on
the handlebars and tighten with the hex
wrench/allen key provided.
4. Once tightened, check the power
switch and display to ensure they
function correctly.
Powering up your REEL
To turn on the scooter, press and hold the power button for 3 seconds. The
display will then power up. To turn on the light, ensure your REEL scooter is
turned on and press the power button once. The light icon will appear on the
display when the light is on. To switch between driving modes, press the power
button twice. The display will then show which driving mode is selected.
To Next Page
Loading...