3
APP REDEMPTION
INSTALLATION
iBobber syncs with iPhone 4S, 5 series, 6, iPad
3, Mini, and phones or tablets for Android™
(4.3 or later) that use Bluetooth Smart® (v4.0).
The iBobber app syncs via Bluetooth Smart®
(v4.0). Make sure your device uses Bluetooth
Smart v4.0. Note: Android app does not have
back buttons; use device built-in back button.
Pair your iBobber directly through our app. If
Android smart device is still asking for a PIN, try
a basic code like 0000 or 1111. If you continue
to have issues contact Reelsonar at info@
reelsonar.com or 1-844-iBOBBER.
From your Android or iOS device, go to the App store and search for iBobber or
ReelSonar. Once you’ve found it, download and install the iBobber App.
Once installed, launch the app and sync the iBobber with your device directly
through the app.
To Next Page
Loading...