Reeva UBESO601SS - Replacing the oven bulb

14
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is suitable
for use on your appliance.
o Do not use harsh or abrasive cleaners or sharp metal scrapers to
clean the oven door glass since they can scratch the surface which
may result in shattering.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by the manufacturer free of charge,
even if the appliance is within the guarantee period.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from your
mains supply before you attempt to either remove or
replace the oven bulb.
o Remove all oven shelves, the drip tray and the side
rack that is on the same side as the oven light.
o Remove the light cover by turning it anti-clockwise.
o Unscrew the bulb anti-clockwise and remove it
from its holder.
o Replace the bulb with a 25 W/300°C, screw
type pygmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position.