7
HVAC/R
Service Products
REFCO Manufacturing Ltd. Telefon +41 41 919 72 82
Industriestrasse 11 Telefax +41 41 919 72 83
CH-6285 Hitzkirch (Switzerland) info@refco.ch www.refco.ch
Service of manifold
For SAFETY and RELIABLITY of the manifold, hoses and accessories should
be inspected to insure they are in good working order prior to each use.
All connection fittings and charging hoses must be checked and free of oil
residue before each use. A visible inspection is also necessary to ensure
that the hoses and the connection are undamaged, tight and leak free.
The seals and gaskets of the manifold are considered normal wear parts
and must be replaced from time to time. If the manifold’s piston valves are
not sealing or shows to be leaking, the pistons valves can easily be replaced
and are available as a spare part. Please refer to the manifold accessory
section of the REFCO catalog.
After installing spare parts to the manifold it is necessary to test the mani-
fold for leaks before the next use
Disposal of manifold
Dispose of the manifold according to the rules and regulations of the coun-
try of use.
Spare Parts and Accessories
Description Designation Part number
Handwheel red M2-7-SET-R 4677826
Handwheel blue M2-7-SET-B 4677834
Complete valve set M2-10-95-R/10 4662607
Piston incl. gaskets M4-6-04-R/10 4662624
Sight glass set M4-6-11 4491018
Battery compartment cover DIGIMON-BATTERY-COVER 4676374
Tool for sight glass M4-6-11-T 4493169
Plastic case DIGIMON-CASE 4676497
External K-type thermocouple DIGIMON-SENSOR-K-TYPE 4681394
Clamp thermocouple K- type DIGIMON-CLAMP 4681466
To Next Page
Loading...
Need help?
General
