7.0 Battery management
To increase battery life, the REFSCALE-S has two functions:
Automatic shutdown:
After 30 minutes without any button operation and without any
changes of the measured value, the device switches off. This only
occurs if energy supply via inserted battery is selected.
Alternative power source:
Instead of using batteries, it is possible to power the REFSCALE-S
via USB Micro Type B, e.g. B. via a power supply or a power bank.
8.0 Stable measured
Displayed when the measured value is stable and no
changes happens.
Only in this state it is possible to calibrated the scale and to use the
zero function. If this is not met, the scale must be re-aligned or
restarted. The REFSCALE-S must be placed on a firm, flat surface
and it must not experience any vibration.
9.0 Error
This is displayed when something is wrong.
The following errors can be the cause:
- Missing calibration
- Zero does not work: Exceeding the maximum permitted
deviation limit of 125 grams
- No stable measurement: Scale is not placed on level or steady,
the surface is not firm and flat.
To Next Page
Loading...
