Press for 2 seconds to switch on the device.
Long press to turn off the device.
The backlight can be switched on and off by briefly pressing
.
Tare / 0.00
Resets the scale to zero, regardless of the weight. This function is
used, for example, to subtract the empty cylinder weight.
Net
When taring the scale with a weight on the platform, “Net”
appears on the display.
By increasing the number of filled/emptied cylinder, while using
the Hold function, the Net display also increases. This is possible
up to Net 9. Then it starts again with Net 1.
ZERO
Resets the scale to zero if the weight display deviates from zero
by a maximum of 125 grams. This function is used if a small
deviation is displayed, when the scale is switched on.
To Next Page
Loading...
