ENGLISH
25
2. Color Balance
To adjust the brightness, contrast, saturation, and color (CMY or RGB)
of the image. Comparisons between before and after adjusted images
are shown for reference.
Example:
If a previewed image appears too dark, use the “Brightness” slider in the
Color Balance” window to adjust the image by selecting the slider in the center and
moving it to the right. The image’s “After” view becomes lighter. Select “OK” to accept
the changes which will be sent to the scanning hardware. This can also be used to
c
olor ranges of cyan, magenta and yellow.
To Next Page
Loading...
