Need help?Do you have a question about the Reflex Variomat Touch VS 2-2/35 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Output Voltage | 24 V DC |
| Type | Reflex Variomat Touch VS 2-2/35 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to +70°C |
| Relative Humidity | non-condensing |
Specifies the qualifications and expertise required for personnel performing work on the device.
Details the mandatory personal protective equipment needed for safe operation and maintenance.
Provides a general overview of the Variomat with touch control and its primary functions.
Explains the operating principles, hydraulic connections, and core functionalities of the device.
Provides detailed instructions for the physical installation of the primary and secondary vessels.
Details the necessary hydraulic connections for the device to the system.
Covers the procedures, safety precautions, and wiring for electrical connections.
Lists prerequisites and checks that must be completed before initiating device commissioning.
Explains how the controller calculates switching points based on minimum operating pressure.
Details the process of setting initial parameters during the controller's start routine.
Provides instructions for filling the primary and secondary tanks with water.
Explains how to adjust system-specific values using the controller's customer menu.
Details the procedure for starting the device in automatic operating mode after commissioning.
Describes the functions and operation of the device in automatic mode.
Explains how to adjust and configure various settings within the controller.
Details how to use and navigate the customer menu for system-specific adjustments.
Provides an overview of the customer menu, its parameters, and their functions.
Guides on setting various degassing programmes available in the customer menu.
Explains system messages, their potential causes, and recommended remedies.
Summarizes the regular maintenance tasks, checks, and their recommended intervals.
Details the procedure for checking and verifying the device's switching points.
Covers inspection procedures for various device components, including safety-related aspects.
To Next Page
