Need help?Do you have a question about the Reflex Variomat Touch VS 2-1/60 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Max. system pressure | 10 bar |
| Communication | Modbus RTU |
| Input voltage | 24 V DC |
| Output voltage | 24 V DC |
| Output current | 2 A |
| Protection class (Power Supply) | IP20 |
| Type | VS 2-1/60 |
| Operating temperature | 0 °C |
| Controller | Touchscreen |
Specifies the qualifications required for personnel performing work on the device.
Defines the device's purpose and acceptable applications in heating and cooling systems.
General description of the Variomat with touch control and its safety features.
Explains the basic hydraulic functions of the Variomat system.
Detailed steps for correctly installing the primary and secondary vessels.
Guidance on connecting the device's hydraulic components to the system.
Comprehensive guide to making the electrical connections to the device.
Visual representation of the device's terminal connections.
Detailed layout of terminals for the connection component.
Detailed layout of terminals for the operating unit.
List of prerequisites before starting the commissioning process.
Explains how operating pressures determine controller switching points.
Guide to setting initial parameters during the device's start-up routine.
Procedures for filling the primary and secondary tanks with water.
How to adjust system-specific values via the controller's customer menu.
Steps to initiate automatic operation after commissioning.
How the device functions and is monitored in automatic operating mode.
Instructions for operating the device manually for testing and maintenance.
How to adjust various parameters and settings within the controller.
Navigating and using the customer menu for system-specific adjustments.
Instructions for configuring different degassing programmes.
Explains system messages, their causes, and remedies for troubleshooting.
A summary of regular maintenance tasks and their intervals.
To Next Page
