9
Remote Pairing
remote control
*ALTERNATE REMOTE PAIRING PROCESS!
Locate the Control Box (see parts list on page 4) and press
the reset button twice. A green LED light will illuminate on
the Control Box. On the remote, press and hold the Head
Up and Favorite 1 buttons. The LED light on the remote
will start flashing. When the LED stops flashing, the green
LED light on the Control Box will go out. Release the Head
Up and Favorite 1 buttons. The remote is now paired to the
adjustable base.
Test all remote functions. If the remote buttons do not impact
the adjustable base movements, please repeat the process again
or call customer service: 1-800-268-4414
STEP 1
STEP 2
The original remote that comes in the box is already paired to
the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps
below.*
Press and hold down the Head Up
and Favorite 1 buttons simultaneously.
The LED light on the remote will start
flashing. When the LED stops flashing,
the illuminated light on the Battery
Backup Box will go out. Release the
Head Up and Favorite 1 buttons. The
remote is now paired to the adjustable
base.
Locate the Battery Backup Box
and press the button TWICE. A
light on the Battery Backup Box
will illuminate.
Button
STEP 3
Child Lock Feature
Press and hold the HEAD UP and FOOT UP buttons
together for 3 seconds until the remote backlight flashes
twice.
The remote is now in Child Lock. Pressing any buttons
while in Child Lock will yield no movement to your
adjustable base.
Press and hold the HEAD DOWN and FOOT DOWN
buttons together for three (3) seconds, then hold HEAD
UP and FOOT UP for three (3) seconds until the remote
backlight flashes twice.
The remote is no longer in Child Lock. The remote and
adjustable base will work normally.
Activate Child Lock
Deactivate Child Lock
To Next Page
Loading...
