NAMES OF CONTROLS
1. FM ANTENNA
2. HANDLE
3. CD DOOR
4. CASSETTE PAUSE KEY
5. CASSETTE STOP/EJECT KEY
6. CASSETTE FAST FORWARD KEY
7. CASSETTE REWIND KEY
8. CASSETTE PLAY KEY
9. /SCANBUTTON
10. M.+ BUTTON
11. TUN.+ / BUTTON
12. VOLUME + BUTTON
13. PROG./M./P-MODE BUTTON
14. STOP BUTTON
15. M.- BUTTON
16. /FUNC. BUTTON
17. VOLUME - BUTTON
18. TUN.- / BUTTON
19. LCD DISPLAY
20. SPEAKERS
21. CASSETTE COMPARTMENT
22. AUX IN JACK
23. HEAD PHONE JACK
24. AC SOCKET
25. VENTILATION HOLES
26. BATTERY COMPARTMENT
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the tail of AC power cord into AC socket on unit and the plug into household AC outlet. The
batteries will be automatically disconnected.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-2/C size batteries (not included)
into compartment. Please follow correct polarities as indicated.
CAUTION
Remove batteries if they are flat or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTIONS
TURNING THE UNIT ON/OFF
Press the button to turn the unit on, press and hold the button to turn the
unit off.
Note: In AUX/CD /TAPE mode, when the unit is not providing the main function for 15 minutes,
the unit will automatically switch into standby mode. Press the button to turn on the
unit again.
Please note that low volume setting in the audio source may be recognized as “no audio signal”,
this will affect the capability of signal detection from the device and can also originate an
automatic switch into standby mode. If this happens please reactive the audio signal
transmission or increase the volume setting on the audio source player in order to resume
playback.
To Next Page
Loading...