EasyManua.ls Logo

Reflexion RCR2260 - Using the Cassette

Reflexion RCR2260
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UK
4
Electrostatic Discharge hints-The unit may reset or many not reset to normal operation mode
due to electrostatic discharge, just switch if off and reconnect again.
ADJUSTING VOLUME
Press the volume+/ volume-button to increase or decrease volume.
HEADPHONE JACK
For private listening, connect a 3.5mm headphone (not included) to the HEADPHONE jack. The
SPEAKER will be automatically disabled.
HEADPHONE WARNINGS:
Set the volume of the device to minimum before using headphones. A volume that is set too
high can lead to hearing impairment / damage over a long period of time. Therefore, to protect
your hearing, use a comfortable room volume.
USING THE CASSETTE
UNDERSTANDING THE BUTTONS
PLAY - Press to play cassettes.
REWIND - From stop mode, press to rewind the tape toward the beginning.
F.FWD - From stop mode, press to advance the tape toward the end.
STOP/EJ. - Press to stop current tape activity or to open the cassette compartment door when
no buttons are active.
PAUSE - Press to interrupt tape play mode. Press the second time to resume tape play mode.
PLAYING A CASSETTE TAPE
1. Press the button on unit to select TAPE mode.
2. Press STOP/EJ. Key to open the cassette compartment door.
3. Insert cassette tape into the compartment with the open edge facing up and the full reel on
the right.
4. Close the door securely.
5. Press REWIND or F.FWD to move tape to the desired starting point.
6. Press PLAY key to begin playing the tape.
7. Adjust the volume to your desired listening level.
AUTOMATIC STOP FEATURE
When the cassette deck is operating in play mode and the end of the tape is reached, the unit
automatically shuts itself off and returns all buttons to the off position.