Rega Aria - Introduction to the Rega Aria

Introduction
The function of a phono pre amplier is to match the output from a pick
up cartridge to the input of a line level amplier. It is required to amplify
the very low signals produced by the cartridge and also to equalise the
frequency curve in accordance with RIAA record cutting standard.
Moving coil (MC) and moving magnet (MM) cartridges require different
types of phono pre ampliers to achieve optimum performance. The Aria
uses two separate circuits dedicated to both moving coil and moving
magnet cartridges and avoids compromises.
The Aria is an “all analogue amplier” with no digital control circuitry.
The fully aluminium case screens the internal circuit from any stray RFI
signals.
We have avoided including any superuous gadgets as they obstruct
the signal path and degrade the sound quality. The Aria incorporates
remarkable and innovative design ideas. These innovations are described
more fully in the technology section of this manual.
Alternatively, you can simply switch on, sit back and let your Aria sing for
itself.
Introduction
Technology
Installation
Back Panel Connectivity
Loading Seings
Front Panel Indicators
MC Cartridge Adjustment
Technical Specications
Important Notes
English
Français
Deutsch
Italiano
Español
Português
Nederlands
Dansk
Svenska
Polski
1
9
17
25
33
41
49
57
65
73
1
2
2
3
3
4
5
6
7
1