Rega Aura - Specifications; General Conditions and Input;Output; Capacitance, Load, and Frequency Response; Noise, Dimensions, and Power

08
Specications
General Conditions
Generator Source Resistance 20Ω (Audio Precision Z Out)
Unbalanced 500Ω
Gain Setting I 4.9mV - 69.5dB
Dimensions (W x H x D) 350 x 435 x 88mm (13.8 x 17.1 x 3.5in)
Minimum 63.5dB
Bandwidth 100Hz to 22kHz Typically 0.03% @ 1V 20Hz 20kHz
Balanced XLR connectors pin 2 positive and pin 3 negative.
The positive pin 2 connection on the balanced output is the same connection as the unbalanced output.
Gain Setting I 67µV - 69.5dB
Frequency Response 13.5Hz (-3dB) to 100kHz (-0.2dB)
Unbalanced 200mV
Power Supply AC supply 230V - 115V nominal ±10%
Capacitive Load 1000, 2000, 3200, 4300, 5700pF
Gain Setting I -77dB V
Unbalanced 100Ω
Output Load Resistance 100kΩ (Audio Precision Z In)
Balanced 1000Ω
Gain Setting II 9.6mV - 63.5dB
Weight 13kg (28.7lbs)
Maximum 69.5dB
Gain Setting II 131µV - 63.5dB
RIAA Accuracy Better than 0.2dB 100Hz to 50kHz
Balanced 400mV
Power Consumption 15.3W
Input Load 50, 100, 150, 300 & 400Ω
Gain Setting II -82dB V
Balanced 200Ω
Input Sensitivity for 200mV on Unbalanced Output
Frequency Response
Rated Output Level
Power
Capacitance/Load Settings
Output Noise Level (Unbalanced Output, A-Weighted and 15Ω Input Load)
Output Resistance
Gain Input to Unbalanced Output
THD
Balanced Output Connections
Input Overload @ 1kHz
Dimensions/Weight
Absolute Minimum Output Load Resistance (for a -3dB roll o󰀨 @ 20Hz)
EN