109
Troubleshooting
(Power on, sound from one speaker only)
Are the connections between
the speakers and the amplifier
secure and functioning
correctly?
Are both channels of
the speaker connected
and working properly?
Are the cartridge
connections at the head
shell functioning? Check
cartridge tags
The speaker is
at fault
Contact your Rega Dealer
NO
NO
NO
YES
YES
YES
YES
NO
Check the source
component for faults. Swap
the output leads and check to
see if the fault swaps over
Correct the fault by plugging
them in. If the wires are loose or
not correctly soldered, contact your
Rega dealer
There may be a fault in the
amplifier/speaker chain. Swap
speaker cables. Does the fault
swap channels?
The
source is at
fault
The amplifier or speaker
cables are at fault
YES
Troubleshooting
(Loud hum through both speakers when ‘Phono’ is selected)
Is the amplifier
situated directly below
the cartridge?
Are there other pieces of
HI-FI equipment close to
turntable or amplifier?
Contact your Rega Dealer
NO
Correct the
fault
YES
NO
YES
To Next Page
Loading...
