Regal 2500 - Page 195

CHAPTER 6
6-52
Gas Grill-Operating Instructions
• A uni
versal mount is required to attach the
grill to the deck fi tting.
• Attach the “fi sh-on” mount top to the two
thumb screws. Tighten securely.
• Fit the grill-mount assembly in the square
deck fi tting. Make sure the grill is tightened
in place.
• Screw on the propane bottle until
tight.
• With a long match or propane starter
apply fl ame to the burner. Always
apply the fl ame to the burner before
turning on the gas. A lighting hole is
located below the lid’s handle.
• If locked, push the center burner down to unlock. The control knob
now can be turned to start the grill.
Note: Grill Shown Upside Down To Clarify Features
Regulator
Screw Propane
Tank Clockwise
To Tighten
Fish-On Mount
Thumb Screws
Square Insert
CHAPTER 6
6-52
Gas Grill-Operating Instructions
• A uni
versal mount is required to attach the
grill to the deck fi tting.
• Attach the “fi sh-on” mount top to the two
thumb screws. Tighten securely.
• Fit the grill-mount assembly in the square
deck fi tting. Make sure the grill is tightened
in place.
• Screw on the propane bottle until
tight.
• With a long match or propane starter
apply fl ame to the burner. Always
apply the fl ame to the burner before
turning on the gas. A lighting hole is
located below the lid’s handle.
• If locked, push the center burner down to unlock. The control knob
now can be turned to start the grill.
Note: Grill Shown Upside Down To Clarify Features
Regulator
Screw Propane
Tank Clockwise
To Tighten
Fish-On Mount
Thumb Screws
Square Insert