Using Fresh Water System With City Water Valve
Use this procedure when at the dock or mooring.
1. After verifying that the water supply is safe for drink-
ing fi nd the city water valve at aft transom. Remove the
cap and inspect screen for debris.
2. Connect a white colored kink resistant garden hose
to the city water valve. Turn on the marina water supply
and check for leaks at the connection. White garden
hoses are the ones rated for fresh water supply verses a
regular garden hose that normally leave a rubber smell
in the water supply.
3. Repeat steps 2 and 3 as indicated on the last column
since the process at this point duplicates itself.
Note that the city water valve protects vessel water sys-
tem by limiting incoming water pressure to 35 psi’s.
CITY WATER VALVE
TURN COUNTER CLOCKWISE TO OPEN
99
To Next Page
Loading...
