Working on the motor with power connected may result
in electrical shock or other conditions that may cause
personal injury, death or property damage.
Always disconnect the power from the HVAC system
before removing or replacing connectors, servicing
the motor, removing the high voltage plug, and before
reconnecting.
Always disconnect the power from the HVAC system
before removing or replacing connectors, servicing
the motor, removing the high voltage plug, and before
reconnecting.
Disconnect AC power from the system and make sure
the fan blade has come to a complete stop before
servicing the motor.
Do not operate motor without fan blade attached. Such
operation will cause the motor speed to oscillate
up and down.
You must have the correct replacement motor from the
manufacturer that is a direct replacement for the failed
motor. USING THE WRONG motor VOIDS ALL PRODUCT
WARRANTIES AND MAY PRODUCE UNEXPECTED
RESULTS.
Genteq does not condone the repair of any individual
components in the motor control or motor of their
ECM products. This practice is unsafe and may cause
personal injury, death, or property damage.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
To Next Page
Loading...
