53
Indoor Motor
Final Installation Checks
Check all wiring and connections, especially
those removed while servicing.
Clear all condensate drain and traps.
Check and plug leaks in return ducts and
equipment cabinet.
Verify that the system is running quietly and
smoothly, producing proper air flow in all modes
(heating, cooling, and continuous fan) and all
stages (if applicable).
Return all thermostat settings to the customer’s
preference.
If any evidence of moisture, then correct the
issue.
If the area is subject to high amounts of
lightning strikes, then use of additional transient
protection may be helpful.
Ensure the system is set up as follows:
To Next Page
Loading...
