FPI FireGenie
TM
Remote Control Manual 11
Time Zone 1 Off-Time
Programming of Time Zone 1
Time Zone 1 Set Temperature
Programming of Time Zone 1
2) Programming the O -Time of Time Period 1
Press and release the PROG button again to program the Off-Time for Time Period 1. Use the
“+” and “-” buttons to adjust this time setting.
The LCD will show the following:
3)
Programming the Set Temperature of Time Period 1
Press and release the PROG button again to program the Set Temperature. Use the “+” and “-”
buttons to adjust the temperature setting.
Programming of Time Period 1
Time Period 1 O -Time
Time Period 1 Set Temperature
Programming of Time Period 1
To Next Page
Loading...