Regency FireGenie - Page 12

FPI FireGenie
TM
Remote Control Manual12
Time Zone 2 Off-Time
Programming of Time Zone 2
Time Zone 2 On-Time
Programming of Time Zone 2
4) Programming the On-Time of Time Period 2
Press and release the PROG button again to program the On-Time of Time Period 2. Use the
“+” and “-” buttons to adjust this time setting.
The LCD will show the following:
5)
Programming the O -Time of Time Period 2
Press and release the PROG button again to program the Off-Time of Time Period 2. Use the
“+” and “-” buttons to adjust this time setting.
The LCD will show the following:
Programming of Time Period 2
Time Period 2 On-Time
Programming of Time Period 2
Time Period 2 O -Time