72 | Grandview® G800C Gas Fireplace
installation
This heater does not require a 120V A.C. supply for
operation. In case of a power failure, it will continue
to operate using the on/off switch provided.
CAUTION: Ensure that the wires
do not touch a hot surface and are
away from sharp edges.
WARNING:
Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding)
plug for your protection against
shock hazard and should be
plugged directly into a properly
grounded three-prong recep-
tacle. Do not cut or remove the
grounding prong from this plug.
Wiring Diagram With and Without Thermostat/Remote Control
Caution: Label all wires prior to discon-
nection when servicing controls.
Wiring errors can cause improper and
dangerous operation. Verify proper
operation after servicing,
To Next Page
